Getting ready
The crew turned the equipment off at the breaker and drained the spa down into the pool, so no water had to be dumped.
Opening up the crack
They ground under the tile and removed it along the cracked section, then chipped out the crack itself so the repair material could get a solid grip deep in the shell, not just on the surface.
Waterproofing
The crack and the whole tile area were packed with hydraulic cement, a fast setting waterproof cement made for pools. This is the part that stops the water. An epoxy patch on the surface tends to let go and leak again, so we fill the crack itself.
New tile and grout
The tile was hung back with thin set and spacers to keep the joints even, then grouted with dyes (buff and charcoal) to blend with the existing grout. We do our best to match, but a repaired section can look a little different from the rest. See how we repair pool cracks.
Back in use
The breaker stayed off overnight to let everything cure, and the spa was ready to fill the next day.





Losing water in Cape Coral?
Call or text (239) 533-5935 or request service. Leak detection starts at $295.
